Common surface treatments of plastic tableware include electroplating, fuel injection, printing, water transfer and other surface treatment processes. In life, we should paint plastic surface.

噴涂塑料餐具的目的是在表面形成堅固的連續涂層，以發揮其裝飾，保護和其他特殊功能。

The purpose of spraying plastic tableware is to form a solid continuous coating on the surface to give full play to its decoration, protection and other special functions.

塑料是否具有結晶性對漆膜的粘附性有很大影響，并且高結晶度的漆膜的粘合性能差，并且當結晶度低時表面層涂層相對較好。另外，塑料的表面能通常較低（如尼龍和PP），這不利于涂層的粘附，并且基材和涂層之間的粘合性差。

Whether the plastic has crystallinity has a great influence on the adhesion of the paint film, and the adhesion of the paint film with high crystallinity is poor, and the surface coating is relatively good when the crystallinity is low. In addition, the surface energy of plastics is usually low (such as nylon and PP), which is not conducive to the adhesion of the coating, and the adhesion between the substrate and the coating is poor.

粘合力差異的能直接影響是在表面涂上油漆，但不能達到理想的表面處理效果。

The direct influence of adhesion difference is to paint the surface, but it can not achieve the ideal surface treatment effect.
                    

有效提高粘合力的方法涂料的實際生產是通過預處理基材來改善粘合性。與電魚和拋光相比，常用的方法是電暈，火焰，砂光，粘合促進劑等。

The effective way to improve adhesion is to improve adhesion through pretreatment of substrate. Compared with electric fish and polishing, the common methods are corona, flame, sanding, adhesion promoter, etc.

在處理方式下，在基材與涂料之間噴涂一層搪瓷處理劑粘合促進劑，工藝操作更簡單，效果更穩定可控，因此廣泛應用于涂料工業。

In the treatment mode, a layer of enamel treatment agent adhesion promoter is sprayed between the base material and the coating. The process operation is simpler and the effect is more stable and controllable, so it is widely used in the coating industry.

力等測試也可順利通過。

The force test can also pass smoothly.

以上就是關于"塑料餐具表面處理的方法"介紹，相信大家都有所了解了，如想了解更多資訊內容請多多關注我們的網站。

The above is about "plastic tableware surface treatment method" introduction, I believe you all know, if you want to know more information content, please pay more attention to our website.